发夹式换热器管束流致振动数值模拟研究

运用计算流体力学方法,采用ANSYS CFX软件对发夹式换热器的壳侧流场进行了三维数值模拟。流场计算中采用多孔介质模型对管束区域进行简化,分析了壳侧流场的速度分布,结果表明:直管段部分的流体湍流强度大于弯管段,且外层管束所在区域为高流速区,受流体冲刷严重。结合流场信息,通过功率谱生成随机激振力,采用ABAQUS软件模拟计算了湍流激振下管束的振动响应,结果显示管束的面外均方根位移远大于面内位移,且弯管部分的振动位移最大。该研究结果可为发夹式换热器的性能分析和优化设计提供参考和依据。     

A new ship energy management algorithm to the smart electricity grid system

In this paper, a new energy management algorithm has been suggested for the ships connected with alternative energies considering the smart electricity grid features. The algorithm focuses on the use of optimum energy source on the shipboard based on the priorities of authorities such as the most economic, environmental, or both criteria at the ports. The algorithm is performed in MATLAB, and several case studies are simulated to validate the results. The 5 maritime nations, which are at different regions: United States, Belgium, Turkey, China, and Australia, are taken into account in the case studies. The actual data of a bulk carrier ship have been used to achieve tangible results in the simulations. The results of the case studies are compared to determine the changes of energy cost and released emission to meet demand of electricity on the ships. Capital cost of the proposed concept is also given to make an economic evaluation. The results show that the ship energy management algorithm provides the significant economic and environmental advantages. This paper aims to contribute to the importance of the ships in the smart electricity grid concept for the maritime and electricity sector representatives.     

基于遗传萤火虫算法的含风电电力系统机组组合研究

随着风能资源的广泛应用,机组组合问题求解愈显复杂。以减少煤耗费用提高系统经济性为目标,提出一种采用遗传萤火虫算法求解含风电电力系统机组组合问题的新方法。引入遗传算法双矩阵通路判断及约束修复策略,提高了初始解生成质量及产生速度;再利用萤火虫算法求解连续负荷经济优化分配,给出自适应交叉概率,从而提高了算法的收敛速度。应用所提算法对经典10机系统优化仿真表明,与其他算法相比,该方法能合理安排机组组合,提高系统供电的经济性,具有较好的实用价值。     

5G基站供配电勘察设计思路的调整分析

针对5G基站设备相对于以往2G/3G/4G设备的变化,面向一线勘察设计人员,阐述5G基站在供配电需求方面功耗增大、供电方式多样化、供配电改造工作量和难度加大等相应变化,归纳相应的勘察前期准备工作要点,分析在实际工作中可能面临的外市电引入改造、供电方式选择的多样性、新型锂电池应用等重点、难点,介绍理想的5G供配电模式及发展方向,最后提出5G基站供配电勘察设计工作思路调整的建议。     

电厂锅炉补给水处理中全膜法处理工艺的应用研究

以某电厂为背景,针对其中的全膜法展开探讨,涉及到工艺流程、相关构筑物以及设备参数等多方面内容,并将其与离子交换法进行了对比分析,结果显示,全膜法的可行性更高,能达到无酸碱排放的效果,能够发挥出显著的社会效益,以期给相关工程提供可行参考,由此推动电厂炉给水处理工作的持续开展。     

Heavy Water Additive in Formamidinium: A Novel Approach to Enhance Perovskite Solar Cell Efficiency

Heavy water or deuterium oxide (D₂O) comprises deuterium, a hydrogen isotope twice the mass of hydrogen. Contrary to the disadvantages of deuterated perovskites, such as shorter recombination lifetimes and lower/invariant efficiencies, the serendipitous effect of D₂O as a beneficial solvent additive for enhancing the power conversion efficiency (PCE) of triple-A cation (cesium (Cs)/methylammonium (MA)/formaminidium (FA)) perovskite solar cells from ≈19.2% (reference) to 20.8% (using 1 vol% D₂O) with higher stability is reported. Ultrafast optical spectroscopy confirms passivation of trap states, increased carrier recombination lifetimes, and enhanced charge carrier diffusion lengths in the deuterated samples. Fourier transform infrared spectroscopy and solid-state NMR spectroscopy validate the N–H₂ group as the preferential isotope exchange site. Furthermore, the NMR results reveal the induced alteration of the FA to MA ratio due to deuteration causes a widespread alteration to several dynamic processes that influence the photophysical properties. First-principles density functional theory calculations reveal a decrease in PbI₆ phonon frequencies in the deuterated perovskite lattice. This stabilizes the PbI₆ structures and weakens the electron–LO phonon (Fröhlich) coupling, yielding higher electron mobility. Importantly, these findings demonstrate that selective isotope exchange potentially opens new opportunities for tuning perovskite optoelectronic properties.     

Synthesis of Novel Tetra(µ3-Methoxo) Bridged with [Cu(II)-O-Cd(II)] Double-Open-Cubane Cluster: XRD/HSA-Interactions,Spectral and Oxidizing Properties

A new double-open-cubane core Cd(II)-O-Cu(II) bimetallic ligand mixed cluster of type [Cl₂Cu₄Cd₂(NNO)₆(NN)₂(NO₃)₂].CH₃CN was made available in EtOH/CH₃CN solution. The 1-hydroxymethyl-3,5-dimethylpyrazole (NNOH) and 3,5-dimethylpyrazole (NNH) act as N,O-polydentate anion ligands in coordinating the Cu(II) and Cd(II) centers. The structure of the cluster in the solid state was proved by XRD study and confirmed in the liquid state by UV-vis analysis. The XRD result supported the construction of two octahedral and one square pyramid geometries types around the four Cu(II) centers and only octahedral geometry around Cd(II) two centers. Interestingly, NNOH ligand acts as a tetra-µ³-oxo and tri-µ²-oxo ligand; meanwhile, the N-N in NNH acts as classical bidentate anion/neutral ligands. The interactions in the lattice were detected experimentally by the XRD-packing result and computed via Hirschfeld surface analysis (HSA). The UV-vis., FT-IR and Energy Dispersive X-ray (EDX), supported the desired double-open cubane cluster composition. The oxidation potential of the desired cluster was evaluated using a 3,5-DTB-catechol 3,5-DTB-quinone as a catecholase model reaction.     

Wire-free electricity: Insights from a techno-futuristic exploration

Wireless Power Transmission is an emerging technology that enables the transmission of electricity without the use of artificial conducting mediums. Lack of significant technological breakthroughs widely affected its progress. In this paper, we analyze the early progress of WPT and attempt to forecast its growth using Pearl curve model. Fisher-Pry substitution model analysis indicates that technology substitution of wired transmission has just begun and half the substitution will be over by 2028. We conducted patent landscaping to identify hot domains and specific technology areas. Implications for technology developers and manufacturers, electric utility providers and national policymakers are also identified.     

An Improved Torque Sensorless Speed Control Method for Electric Assisted Bicycle With Consideration of Coordinate Conversion

In this paper, we propose an improved torque sensorless speed control method for electric assisted bicycle, this method considers the coordinate conversion. A low-pass filter is designed in disturbance observer to estimate and compensate the variable disturbance during cycling. A DC motor provides assisted power driving, the assistance method is based on the real-time wheel angular velocity and coordinate system transformation. The effect of observer is proved, and the proposed method guarantees stability under disturbances. It is also compared to the existing methods and their performances are illustrated through simulations. The proposed method improves the performance both in rapidity and stability.      

应用独立分量分析的激光测风雷达湍流频谱分解

针对大型风力发电机机组中常见的脉动湍流、风机尾流与涡流等湍流信号,研究了利用自然梯度下降的独立分量分析方法的湍流频谱分离效果,以区分中心风速与湍流信号,提高风机机组的综合工作效率。首先分析了风机组中常见湍流信号的后向散射与频谱分布特点,然后依据这些特点设计了对应的独立分量分析模型。在仿真结果符合要求的基础上,进行了双目激光雷达天线的风速采集与实际分离效果检测。实验结果表明,在大气折射率结构常数C2n≤10-14同时广义大气常数α≥4的通常情况下,利用双目信号能够分离出一个湍流中心和一个中心风速。对1 s内两个谱峰的波动范围进行统计,获得(2.59±0.05)MHz的中心风速以及(1.22±0.19)MHz的湍流中心估计,且二者的平均信噪比分别为25.93 dB和31.01 dB,能够在获得稳定的中心风速估计的同时得到一个较为稳定的湍流中心估计。